4
START-UP
18
SD 200 W/R
www.krohne.com
01/2020 - 4003851304 - MA SD 200 W/R R04 en
4.1 Switching on the power
4.2 Operation keys
DANGER!
To avoid fatal injuries as well as destruction or damage of the device assure a correct installation
before switching on the power. This includes:
•
The device is mechanically safe, mounting and power connection comply with the regulations.
•
The electrical terminal compartments must be secured, i.e. the housing has to be closed and
the screws have to be tightened.
•
The electrical operating data of the power supply comply with the requirements of the device.
CAUTION!
Installation, assembly, start-up and maintenance may only be performed by appropriately
trained personnel. The regional occupational health and safety directives must always be
observed.
The following key are available
Figure 4-1: Operation keys
1
This key has no function at Operator level.
The key is used to program and save new values or settings. It is also used to gain access to SETUP-level
2
This key has no function at Operator level.
The arrow-key
is used to increase a value after PROG has been pressed or to configure the unit
3
This key has no function at Operator level.
The arrow-key
is used to increase a value after PROG has been pressed or to configure the unit
