KRONAsteel INGA, Application Sheet

5

EN  Application sheet

EN  Application sheet

KITCHEN HOODS

lation, connection and repair.

The model name and important technical char-

acteristics of the kitchen hood are specified in-

side the case.

Security measures

The kitchen hood is connected to the power net-

work with the voltage of 220/240 V – 50 Hz, us-

ing a wall outlet with earthing only.  The kitchen 

hood has 1 electrocution protection class.

Use the light bulbs with the voltage no higher 

than specified in the Instructions.

It is forbidden to operate the kitchen hood with-

out an aluminum grease filter.

The air from the kitchen hood should be re-

moved to the air shaft only (its removal to the 

chimney is strictly forbidden).

SAFETY OF CHILDREN

Children often do not understand the danger of 

electrical appliances. While the kitchen hood is 

functioning, watch your children and do not al-

low them to work with it. Packaging materials 

(such as polyethylene film) may cause suffoca-

tion. Keep them out of reach of children

K

ITCHEN HOOD DESCRIPTION

The hood exterior consists of the parts as follows  

(Fig. 1, 1a):
1.   Hood case interior.
2.   Remote control console.
3.   Glass-made decorative panel.
4.   Backlighting.
The kitchen hood accessories are  (not included) 

as follows (Fig. 2):
1.   Odour catching coal filter.  

To be used for air filtration in premises with a 

kitchen hood to operate in the recirculation mode  

(See "Kitchen hood operation").

Coal filters can be puchased at retailers'.

KITCHEN HOOD OPERATION

Your kitchen hood has 3 ventilation rates. Depend-

ing on how much damp forms during cooking and 

frying, you may choose the best ventilation rate. 

This will improve ventilation efficiency. To make 

the air completely clear, switch on the stove and 

the hood at the same time. After you have finished 

cooking, let the kitchen hood operate for a while. 

This will enable to eliminate damps and unwished 

odors in the kitchen.

Remote control console   

INGA (EU) S / IRIDA (EU) S

On the front panel of the hood there is a touch 

mode switch the operation of the motor and the 

light bulb (see Figure 3). Its elements have the fol-

lowing functional meaning:

1. Turn on / off the hood.

2. Reducing the speed of the motor.

3. Display showing the speed.

4. Increase the speed of the motor.

5. Turn on / off lighting.

Turning on / off the hood is done by touching the 

icon 1 for 2-3 seconds. Switching speed of drawing 

is effected by the icons "–" or "+".

With this switch, by pressing the corresponding 

buttons You can select one of three speeds in ran-

dom order motor, turn on the lights or activate the 

"Timer" function. The selected speed number is 

shown on the display.

At the working hood, to activate the "Timer" func-

tion, you must press and hold the "–" and "+" but-

tons simultaneously for more than two seconds. 

The timer number is indicated by the flashing digit 

of the selected speed number on the display. Af-

ter 5 minutes after turning the timer on, the hood 

stops automatically. This function is very conve-

nient for removing residual smell from the kitchen 

after cooking.