KRONAsteel KAMILLA 600 inox, Application Sheet

GER Gebrauchs- und Wartungsanweisung

45

*   Except for the backlight, if their replacement is not described in the instruction manual. In this case, only the replacement of the lamp 

is free of charge, the lamp itself is purchased separately.

45

EN  Application sheet

 Warranty terms and conditions

Free of charge repairing items are that items which are 

used exclusively for personal, family, home and other 

needs that are not related to the performance of entre-

preneurial activity or satisfaction of domestic needs in 

the office of the organization, institution or enterprise. 

Use of the product for purposes other than those men-

tioned above is a violation of the operating rules.

The coupon entitles you to free repair of the prod-

uct within 24 months from the date of purchase. For 

service issues, contact the official representative of the 

brand. The data of the official representative can be found 

on the website krona-steel.com. Defective parts of prod-

ucts during the warranty period are repaired or replaced 

with new ones for free. The solution to the issue of the 

expediency of their replacement or repair is taken by the 

Service Center.

The service life of the product is 7 (seven) years. The ser-

vice life of the product is calculated from the date of pur-

chase or if it is not possible to determine it, from the date 

of manufacture of the product encrypted into the serial 

number on the manufacturer's label inside the hood.

The presence of the factory label on the product is man-

datory! Make sure it is present and stored for the entire 

life of the product. The absence of a factory label can lead 

to the impossibility of determining the model of the prod-

uct, the date of manufacture and as a consequence the 

refusal of free repair.

Free repair is performed only if you have a correctly filled 

warranty card, a bill for the product purchased or other 

documents confirming the warranty period of the product 

submitted for repair or diagnostics.

When buying the product, make sure that the warranty 

card was correctly filled, had no corrections, and it indi-

cates the following: date of sale, stamp of the trade or-

ganization and seller's signature (including tear-off cou-

pons), model and serial number of the product. 

Before calling a service center specialist, read the in-

struction manual of the product carefully. If a specialist 

of the service center correctly diagnoses the product, the 

service center will have the right to demand payment of 

a false call from the consumer according to the price list.

The manufacturer does not bear any responsibility for any 

possible damage caused to the consumer or his property, 

and does not perform free repair in the following cases:

–   lack of documents confirming the right to free repair;

–  repair by unauthorized persons, disassembling the 

product, changing the design and unintended inter-

ventions;

–   non-observance of the operating rules specified in the 

instruction manual for the product;

–  non-observance of the installation rules specified in 

the instruction manual for the product;

–   installation of an air duct with a diameter less than that 

specified in the operating instructions and the pres-

ence of obstructions for free passage of air in the chan-

nel;

–   replacement of components and consumables (acces-

sories, lighting lamps *, charcoal filters, grease-col-

lecting aluminum filters, remote controllers, batteries 

etc., plastic parts manually moved);

–   use of consumables of inadequate quality;

–   faults and damages caused by extreme conditions and 

actions of force majeure (fire, natural disasters, etc.);

–  the effects of water and solutions on the mechanical 

and electrical components of the product;

–   negligent storage and / or negligent transportation;

–   damage (failures) of equipment or violations of its nor-

mal operation caused by animals or insects;

–   falling into the internal working volumes of foreign ob-

jects;

–   mechanical damage to the product (scratches, cracks, 

chips, etc.);

–   loss of presentation of the product due to exposure of 

the product to chemicals;

–  use of cleaning / washing agents that are not suitable 

for this type of product;

–  thermal, mechanical and other similar damage that 

arose during operation;

–  use of the product for purposes for which it is not in-

tended;

–  non-observance of the warranty service conditions 

specified in the warranty document. 

Setting up, installing, connecting and cleaning the prod-

uct does not apply to warranty service.