III - 4
Operation
Connection for operator-friendly control unit
Mount the operator-friendly control unit on the tractor within
the field of view of the driver.
Connect the operator-friendly control unit to the on-board
computer.
Plug the control cable (1) into the socket (2) of the
operator-friendly control unit.
Secure the connection with the union nut (4).
Connect the power supply cable (12 V) for the operator-
friendly control unit to the 3-way power socket on the
tractor.
3.4.3 Compressed air connections for air
brakes
Plug the coloured couplings of the compressed air hoses
(1) into the couplings with the corresponding colours on the
tractor.
First connect the yellow coupling and then
the red coupling. Disconnection is carried
out in the reverse order.
•
Arrange the cable connections between the tractor and the short-cut feeder wagon so that
they are not under tension when the vehicles are turning and so that they do not come into
contact with the wheels of the tractor.
BPA02300
1
1
3
2
KLWOA-01
4
Summary of Contents for 4XL-RGD
