10
Settings
10.3
Checking/setting locking of side guards
54
ActiveMow R 360
Original Operating Instructions 150000864_01_en
Setting range of cutting height, .
ü
The machine is in the working position,
.
Shut down and safeguard the machine,
.
Turn the top link until the cutting height is set.
ð
Top link longer = greater cutting height
ð
Top link shorter = smaller cutting height
For version with “high-cut skids”
The cutting height can be increased by means of high-cut skids.
KMG000-025
ü
The mower is supported securely,
.
ü
The machine is shut down and safeguarded,
.
The high-cut skids must always be mounted underneath the cutting discs that run next to the
mower drums.
Insert the high-cut skid (2) into the sliding skid (1) and screw it.
10.3
Checking/setting locking of side guards
KMG000-042
The locking (2) prevents during use that the side guard (1) is folded up and foreign bodies are
slung away. Therefore make sure every time before using the machine that the side guard (1) of
the machine is folded down and secured by the locking (2).
Check the lock
Move the machine to the transport position.
ð
If the side guard folds down, the side guard is correctly adjusted.
ð
If the side guard does
not
fold down, the lock must be adjusted.
