Safety
21
1)
The PTO speeds must not exceed 1000 rpm!
The operating pressure of the hydraulic system
must not exceed 200 bar!
939 101-4
MAX.
1000/
min
MAX.
200
bar
Order No. 939 101-4 (1x)
2)
Before starting the machine,
read and observe the
operating instructions and
safety instructions.
Order No. 939 471-1 (1x)
3)
a)
Caution: some machine parts will stay in
operation for an extended period of time
before being switched off completely. Do
not touch any moving parts of the machine.
Wait until they have come to a complete
stop.
b)
Move the protective devices into position
prior to start-up.
c)
When the machine is running, keep your
distance.
a
b
c
Order No. 939 576-0 Easy Cut 7540 (2x), EasyCut 9140 (2x), EasyCut 9140 CV (4x)
4)
When the machine is running,
keep your distance.
Order No. 942 197 1 (4x)
EasyCut 9140 CV only
5)
While parts are moving, never
reach into areas where there is a
risk of being crushed.
Order No. 942 196 1 (8x)
6)
Keep the stipulated safe distance from power
transmission lines.
Order No. 942 293-0 (1x)
Pos : 11.14 / BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165
939 410 2
STOP
942 197-1
942 197-1
942 196 -1
