Driving and Transport
42
Pos : 17.8 /BA/F ahren und Tr ans port/ Eas yCut/F ahr en-Tr ans port Bild EC 7540/ 9140 @ 11\ mod_1223386858860_78.doc @ 146016
1
4
2
3
EC800038
Fig. 16
Pos : 17.9 /BA/F ahren und Tr ans port/ Eas yCut/F ahr en/Trans port Text mi t Abs perrhahn EC 7540/9140 @ 11\ mod_1223386930673_78. doc @ 146038
For transport/road travel, the disc mower units must be folded upward.
To do this:
•
Switch off PTO drive.
•
Swivel the parking supports into transport position and lock it into position with the bolts
(see chapter on start-up entitled "Swivelling the parking support into transport position").
•
Move the flip switch (2) to the "Down" position (see chapter on operation "Function of
switches on the control unit").
•
Move the flip switch (3) to the "Middle" position (see chapter on operation "Function of
switches on the control unit").
•
Activate the single-action control device (1) (red 1) to raise the mowing units slowly from
the working position to the headland position.
•
Move the flip switch (2) to the "Up" position (see chapter on operation "Function of
switches on the control unit").
•
Activate the single-action control device (red 1) to raise the mowing units from the
headland position to the transport position.
•
Switch off the control unit.
•
Close the shut-off valve (1).
•
Raise the right and left parking supports for transport/road travel and lock them in place
with the bolt (see chapter on Operation "Parking support").
•
Swivel the parking back for the transport/road travel and lock it in place with the bolt (see
chapter on Operation "Parking Support").
Pos : 17.10 / BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165
