Start-up
33
Pos : 17.21 /BA/Inbetri ebnahme/Eas yCut/Pr obel auf nac h Erstmontag e @ 3\mod_1205215927275_78.doc @ 73555
6.5
Trial run after first installation
Caution!
After the first connection to the tractor, the machine must undergo a trial run.
•
The machine must be in working position
•
Do not switch on the PTO until the machine is resting on the ground
and you are absolutely sure that there are no persons, animals or
objects in the danger zone.
•
Start a trial run of the machine from the driver’s seat of the tractor only.
•
Lower the machine into working position.
•
Carefully switch in the PTO of the tractor.
•
Slowly increase the PTO speed to 1000 rpm.
•
Check that the machine is running smoothly and without vibrations.
•
Reduce the PTO speed to idling and wait for the cutting discs / mower drums to come to
a stansdstill.
•
Raise or lower the machine via the tractor hydraulics.
Pos : 18 /BA/-----Sei tenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165