manualshive.com logo in svg

Krone EasyCut B 1000 CR, Operating Instructions Manual

The Krone EasyCut B 1000 CR is a high-performance agricultural machine designed for efficient hay and forage cutting. To ensure optimal usage, it is essential to have the correct guidance. Download the free Operating Instructions Manual from our website to access detailed instructions on operating this product effectively.

Share
Download
background image

Maintenance

 

 

168 

 

Pos: 73 /Layout Module /Diese Seite ist bewusst freigelassen worden. @ 1\mod_1201783680373_78.docx @ 54443 @  @ 1 

Pos: 75 /Überschriften/Überschriften 1/U-Z/Wartung @ 0\mod_1199883581050_78.docx @ 36685 @ 1 @ 1 

 

16 Maintenance 

 

Pos: 76.1 /BA/Sicherheit/EasyCutGefahr - Reparatur-,Wartungs- und Reinigungsarbeiten (2014-10-10 10:32:00) @ 9\mod_1220962711787_78.docx @ 130625 @  @ 1 

 

 

Danger! - When performing repair, maintenance or cleaning work on the machine, or in 
the case of technical intervention, drive elements may start moving (caution, the cutting 
discs continue to run). 

Effect: Danger to life or serious injuries  
• 

Switch off the PTO and disengage it. 

• 

Switch off the tractor engine and remove the ignition key. 

• 

Secure the tractor against accidental start-up and against rolling. 

• 

When performing work on the disc mower, move the disc mower to transport position first 
and close the transport lock (hydraulic valve) on the hydraulic hose. 

 

Pos: 76.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Bei unregelmäßiger Kontrolle der Messerklingen und Haltebolzen @ 0\mod_1196782406281_78.docx @ 14870 @  @ 1 

 

 

Danger! - When checking the cutter blades and retaining bolts only sporadically 

Effect: Danger to life, injuries or damage to the machine. 
• 

Always check the mowing units for damaged, missing or worn blades, retaining bolts, leaf 
springs and cutting discs/blade drum before starting operation; replace any parts that are 
damaged, missing or worn! 

• 

Always replace missing and damaged blades in sets to prevent unbalanced rotation! 

• 

Never mount unevenly worn blades on a drum/disc! 

• 

Whenever a blade is changed, also inspect the fasteners and replace them, if necessary! 

 

Pos: 76.3 /Überschriften/Überschriften 3/P-T/Probelauf @ 0\mod_1196833698843_78.docx @ 15023 @ 3 @ 1 

 

16.1.1 

Test run  

Pos: 76.4 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Probelauf Mehrzahl @ 0\mod_1196782825187_78.docx @ 14889 @  @ 1 

 

 

Danger! - Testing the machine after repair, maintenance or cleaning work and after 
technical intervention. 

Effect: Danger to life or serious injuries 
• 

The mowing unit must be in working position 

• 

Do not switch on the drives until the mowing units are resting on the ground and you are 
absolutely sure that neither persons, animals nor objects are in the danger zone. 

• 

Start a trial run of the machine only from the driver’s seat. 

 

Pos: 76.5 /Überschriften/Überschriften 2/A-E/Ersatzteile @ 0\mod_1196782991234_78.docx @ 14927 @ 2 @ 1 

 

16.2 

Spare Parts  

Pos: 76.6 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Verwendung von nicht zugelassenen Ersatzteilen @ 0\mod_1196783037140_78.docx @ 14946 @  @ 1 

 

 

Danger! - Using non-approved spare parts. 

Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability 
• 

Use only authentic KRONE spare parts and accessories authorised by the manufacturer. 
The use of spare parts, accessories or additional equipment not manufactured, tested or 
approved by KRONE will exclude any liability for consequential damage. 

 

Pos: 76.7 /BA/Wartung/Hinweis Verschleiß verringern @ 0\mod_1199953505303_78.docx @ 37204 @  @ 1 

 

 

 

 

 

Note 

To ensure problem-free operation of the machine and to reduce wear and tear, specific 
maintenance and upkeep intervals must be observed. These include cleaning, greasing, 
lubricating and oiling parts and components. 

 

Pos: 76.8 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for EasyCut B 1000 CR





















































































































































































































































Reviews:

No comments

Related manuals for EasyCut B 1000 CR

Harry 721 Safety And Operation Instructions preview
721
Brand: Harry Pages: 32
H&S 4112 Operator'S Manual preview
4112
Brand: H&S Pages: 32
Lastec 2561C Owner'S Manual preview
2561C
Brand: Lastec Pages: 69
Toro 140-1914 Installation Instructions Manual preview
140-1914
Brand: Toro Pages: 8
Gardenline Essentials User Manual preview
Essentials
Brand: Gardenline Pages: 24
Big League Lawns CheckMate 21462 Installation Manual preview
CheckMate 21462
Brand: Big League Lawns Pages: 4
Scag Power Equipment STC Tiger Cat Illustrated Parts Manual preview
STC Tiger Cat
Brand: Scag Power Equipment Pages: 38
SaMASZ KDC 260 S Operator'S Manual preview
KDC 260 S
Brand: SaMASZ Pages: 52
Mountfield E431 Owner'S Manual preview
E431
Brand: Mountfield Pages: 14
MTD V55D Operator'S Manual preview
V55D
Brand: MTD Pages: 44
Walker H38i Operator'S Manual preview
H38i
Brand: Walker Pages: 84
AL-KO Robolinho 450 Original Operating Manual preview
Robolinho 450
Brand: AL-KO Pages: 116
Poulan Pro PRK17H42STA Owner'S Manual preview
PRK17H42STA
Brand: Poulan Pro Pages: 48
Murray 165036 Repair Parts Manual preview
165036
Brand: Murray Pages: 18
Husqvarna 325L X Series Operator'S Manual preview
325L X Series
Brand: Husqvarna Pages: 50
Husqvarna Z 242F Operator'S Manual preview
Z 242F
Brand: Husqvarna Pages: 78
Snapper 5900551 Operator'S Manual preview
5900551
Brand: Snapper Pages: 52
Salsco 09065 Parts & Operators Manual preview
09065
Brand: Salsco Pages: 29

Brands by name

Popular brands

Load more brands