Maintenance - hydraulic system
182
Pos: 83.16 /Abkürzungen /Abkürzungen sprachneutral/EasyCut/EasyCut B 1000 CV @ 99\mod_1330072906572_0.docx @ 889189 @ @ 1
EasyCut B 1000 CV
Pos: 83.17 /BA/Wartung/Load-Sensing/EasyCut B 1000/Schaubild Hydraulikblock-Komfort EasyCut B 1000 CV @ 98\mod_1329486822673_78.docx @ 879862 @ @ 1
Fig. 114
The following table shows which valves must be released by screwing in the setting screws to
execute the corresponding function:
Carry out the steps in the following table very exactly in order to raise the machine to transport
position. After each step, screw the setting screws out again.
1.
Fold the left-hand lateral mowing unit in headland position (Y11).
2.
Fold the right-hand lateral mowing unit in headland position (Y09).
3.
Deploy the left-hand lateral mowing unit (Y2, Y24.1, Y24.2).
4.
Deploy the right-hand lateral mowing unit (Y2, Y22.1, Y22.2).
5.
Fold the lateral mowing units from the headland position to transport position.
(Y2, Y18.1, Y18.2, Y19)
6.
Retract the left-hand lateral mowing unit (Y1, Y24.1, Y24.2).
7.
Retract the right-hand lateral mowing unit (Y2, Y22.1, Y22.2).
Pos: 84 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
