Technical Data of the Machine
23
1) Order no. 27 007 983 0 (1x)
a) Before placing the machine into operation, read
the operating instructions and safety instructions.
Both must be heeded.
b) Keep the stipulated safe distance from power
transmission lines.
c) The PTO speeds must not exceed 1000 rpm!
The operating pressure of the hydraulic system
must not exceed 200 bar!
Order no. 27 007 983 0 (1x)
1a)
1b)
1c)
a
b
c
2)
a) Caution: Some machine parts will stay in
operation for an extended period of time before
being switched off completely. Do not touch any
moving parts of the machine. Wait until they
have come to a complete stop.
b) Move the safety devices into protective position
prior to start-up.
c) When the machine is running, keep your
distance.
Order no. 939 576-0 (4x)
939 410 2
STOP
939 572-0
942 197-1
a) b) c)
3)
While parts are moving,
never reach into areas where
there is a risk of being
crushed.
Order no. 942 196 1
(8x in case of CV design)
(10x in case of CR design)
942 196 -1
4)
Danger due to rapidly
circulating conveyor belt.
Order no. 942 200 1 (4x)
5)
939 472-2
Danger in the swivel range of the cross
conveyor.
Order no. 939 472 2 (2x)
6)
When the machine is
running, keep your
distance.
Order no. 942 197 1 (4x)
942 197-1
7)
The accumulator is under gas and oil
pressure.
Repair is only possible by exchanging the
complete unit.
Order no. 939 529 0 (2x)
8)
Always close the stop cock
when working on or under
the cross conveyor.
Order no. 27 010 148 0
(2x)
27 010 148 0
Pos: 44 /Überschriften/Überschriften 1/P-T/Technische Daten der Maschine @ 134\mod_1351154219999_78.docx @ 1195165 @ 1 @ 1
