Start-up
42
Pos: 59.26 /Überschriften/Überschriften 2/A-E/Beleuchtung @ 0\mod_1195658399935_78.docx @ 1881 @ 2 @ 1
7.5 Lighting
Pos: 59.27 /BA/Sicherheit/Fahren und Transport/Beleuchtung/Beleuchtungsanlage alle Maschinen @ 7\mod_1215519058839_78.docx @ 103206 @ @ 1
Danger! - Lighting system
Effect: Danger to life, serious injuries or serious damage to the machine.
•
Before transporting on public roads, always connect the lighting system and perform a
function check.
•
Keep the lighting system clean. Soiled lights and spotlights impair road safety.
•
Replace defective light bulbs or broken spotlights.
•
When transporting on public highways, the machine must be in the transport position.
Pos: 59.28 /Überschriften/Überschriften 2/A-E/Beleuchtung anschließen @ 33\mod_1254385308979_78.docx @ 319105 @ 2 @ 1
7.6 Lighting
connection
Pos: 59.29 /BA/Inbetriebnahme/EasyCut/Beleuchtung/Anschluss Beleuchtung T1 EC 7540/9140 @ 11\mod_1223384700516_78.docx @ 145926 @ @ 1
To comply with the Road Traffic Licensing Regulations, the machine is equipped as follows by
default:
•
3-chamber rear lamps (3) (direction indicator: reversing light and brake light)
•
with red reflectors on the rear (4)
•
with lateral yellow reflectors on the rear (5)
Pos: 59.30 /BA/Inbetriebnahme/EasyCut/Beleuchtung/Anschluss Beleuchtung T2 Bild EC B 1000 @ 98\mod_1329407942831_78.docx @ 878933 @ @ 1
4
ECB00025
2
3
1
5
Fig. 16
Pos: 59.31 /BA/Inbetriebnahme/EasyCut/Beleuchtung/Anschluss Beleuchtung T3 EC 2800/3200 3210/4013/7540/9140 @ 11\mod_1222421634749_78.docx @ 141790 @ @ 1
The lighting system is connected via the 7-pin connection cable (2).
To do this:
•
Insert the 7-pin connection cable plug (2) into the appropriate socket (1) of the machine.
•
Insert the 7-pin connection cable plug (2) into the appropriate socket of the tractor.
•
Position the cable so that it will not come in contact with the wheels.
Pos: 59.32 /BA/Inbetriebnahme/Schwader/Hinweis Sauberkeit der Stecker und Steckdosen @ 2\mod_1202399563131_78.docx @ 59273 @ @ 1
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 59.33 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
