KRONE ISOBUS CCI 100 Terminal / manual mode
65
Pos: 61.39.3.10 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-EasyCut/EasyCut B 1000/Grundbild Mähwerke heben/senkenAbsenken der Seitenmähwerke von Transport- in Vorgewendestellung (2014-10-07 14:08:11) @ 93\mod_1327063338293_78.docx @ 786427 @ 3 @ 1
9.2.3
Lowering the lateral mowing units from transport to headland position
Pressing the function key for
and keeping it pressed lowers the two lateral mowing units to
the headland position.
Pos: 61.39.3.11 /BA/BedienungWildschutz EC B 1000 (2014-10-07 13:10:50) @ 95\mod_1328532966623_78.docx @ 799295 @ 3 @ 1
9.2.3.1
Protection for wild animals
CC000542
Fig. 37
Note
When the lateral mowing units are lowered from the transport position to the headland
position, information appears on the display concerning the proper mowing technique. At
the same time a warning tone is audible. The information disappears after several
seconds.
If a field is mowed from the outside inwards, animals are slowly driven from the safe edge
sections into the middle of the field, making it more difficult or impossible for them to flee.
This can be avoided by mowing according to the 'from the inside outwards' technique.
Instead of mowing any edge sections at first, the operator drives straight into the middle of the
field and then mows in a left-handed spiral from the inside to the outside. Animals can rely on
their natural instincts to escape from the field without injury.
Pos: 61.39.3.12 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-EasyCut/EasyCut B 1000/Grundbild Mähwerke heben/senkenAnheben der Setenmähwerke von Vorgewende in Transportstellung (2014-10-07 13:49:46) @ 93\mod_1327308206446_78.docx @ 786666 @ 4 @ 1
9.2.4
Raising the lateral mowing units from headland to transport position
Pressing the function key for
and keeping it pressed raises the two lateral mowing units to
the transport position.
Pos: 61.39.3.13 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-EasyCut/EasyCut B 1000/Grundbild Frontmähwerk heben/senken/Hinweis Tranporthöhe beachten / Seitenschutze müssen angeklappt sein @ 96\mod_1328866631441_78.docx @ 823074 @ @ 1
Note
When the machine is folded up to the transport position information item 4 is always
displayed.
•
Perform a visual check that the side protection is folded up.
•
Be aware of the transport height and lower the lower suspension arm further if
necessary.
Information item 4:
Check the machine transport height.
Side guards must be folded up.
Pos: 61.39.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
