Control and Display Elements
5
Operation panel
5.1
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en
37
5
Control and Display Elements
5.1
Operation panel
The operation panel is used to preselect different functions of the machine. The actual functions
are executed via the control units of the tractor. The following table explains the function of the
individual switches.
KMG000-001
Designation
Function
1 Red warning light
Is lit when the operation panel is switched on.
2 Toggle switch
Middle Operation panel OFF (warning light (1) OFF)
Top
Double-acting control unit (2+/2-)
(2-)
Lowers both mowers from transport position to head-
land position.
(2+)
Raises both mowers from headland position to trans-
port position.
Bottom Activates the lower toggle switch (3).
3 Toggle switch
(is only active when the
toggle switch (2) is pointing
down)
Left
Double-acting control unit (2+/2-):
(2-)
Lowers the right mower from headland position to
working position.
(2+)
Raises the right mower from working position to
headland position.
Double-acting control unit (1+/1-):
(1-)
Lowers the left mower from headland position to
working position.
(1+)
Raises the left mower from working position to head-
land position.
