Start-up
7
Connecting hydraulic hoses
7.2
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en
45
WARNING! People standing between the tractor and the machine may be injured! Make
sure that there is no one between the tractor and the machine while the machine is
connected to the tractor, especially when reversing the tractor.
Move the tractor backward to the machine and position the lower links (1) under the lower
link pins of the machine.
Raise the lower links (1) until they engage in the ball sleeves and lock.
Secure the tractor against rolling away.
Hinge the top link (2) on the three-point hitch and secure it.
In order to avoid that the machine swivels out laterally when driving on roads and when
working on the field, fix the lower links.
7.2
Connecting hydraulic hoses
KMG000-076
In order to connect the hydraulic hoses properly, the hydraulic hoses (1, 2) are marked with
numbers or letters.
Hydraulic hoses for connection to a single-acting control unit are marked with a number and the
plus sign, e.g. (1+).
Hydraulic hoses for connection to a double-acting control unit are marked with the same
numbers, plus sign for the pressure line and minus sign for the return, for example (2+/2-).
Use a control unit on the tractor which can be locked in the neutral position against unintentional
operation.
Control units on the tractor must be used for lifting and lowering the mower and can be locked in
the neutral position to prevent unintentional operation.
Depressurise the tractor hydraulics.
Shut down and safeguard the machine,
.
Clean and dry the connections of the quick couplings.
Connect the hydraulic hose (1+) to a single-acting control unit of the tractor.
Connect the hydraulic hoses (2+/2-) to a double-acting control unit of the tractor.
7.3
Connecting operation panel
NOTICE
Short circuit caused by impurities and moisture in the plug connection
The machine may be damaged by a short circuit.
Make sure that the plugs and sockets are clean and dry.
