1
Information on This Document
1.1
Validity
6
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en
1
Information on This Document
1.1
Validity
This document is valid for machines of type:
EasyCut B 870 CV Collect
This document only describes the rear combination. If the combination is used with front
mounted mower, the operating instructions of the front mounted mower must also be
considered.
All information, illustrations and technical data in this document correspond to the latest state at
the time of publication.
We reserve the right to make design changes at any time and without notification of reasons.
1.2
Re-ordering
If this document has become unusable in whole or in part, you can order a replacement, quoting
the document number on the cover sheet. The document can additionally be downloaded via
the KRONE Media Center
http://www.mediathek.krone.de//
.
1.3
Applicable documents
To ensure that the machine is used safely and as intended, observe the following further
applicable documents.
•
Operating instructions for universal shaft
•
With front mounted mower: Operating instructions front mounted mower
•
Assembly instructions, KRONE
1.4
Target group of this document
This document aims at the operator of the machine who fulfills the minimum requirements of
personnel qualification,
.
1.5
How to use this document
1.5.1
Directories and references
Contents/headers
The contents and headers in this document ensure quick orientation in the chapters.
Index
The index contains catchwords in alphabetical order which enable to find information on a
desired topic easily. The index can be found on the last pages of this document.
Cross references
Cross references to another place in the document or to another document are in the text with
page number.
