8
Operation
8.7
Field mode on slopes
54
EasyCut B 970
Original Operating Instructions 150000711_01_en
Mowing
Adjust the lateral suspension arms,
.
Before driving into the crops, switch on the tractor PTO shaft at idle and slowly bring it up to
the rated speed of the machine.
Drive into the crops.
Check the ground pressure while mowing,
.
To ensure a clean cutting pattern, adjust the driving and cutting speeds to the prevailing
conditions (soil condition, state of the crop, height, density).
Driving into an obstacle
If the impact damage protection system triggers and the mower is swivelled backwards,
reverse the tractor until the impact damage protection system engages automatically.
Mowing small plots
The front mounted mower alone can be used to mow small plots of crops or narrow sections in
open fields. In doing so, the lateral mowers must be in the transport position.
INFORMATION
Leave the control units in the float position while mowing.
8.7
Field mode on slopes
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
To avoid accidents, the relevant safety instructions must be read and observed,
KMG000-094
Do not move the machine from transport into working position or from working into transport
position as long as the machine is operated diagonal to the slope.
