10
Settings
10.2
Setting the lateral links
60
EasyCut B 970
Original Operating Instructions 150000711_01_en
KMG000-025
ü
The machine is in headland position.
ü
The machine is supported safely,
.
ü
The machine is shut down and safeguarded,
.
The high-cut skids must always be mounted underneath the cutting discs that run next to the
mower drums.
Insert the high-cut skid (2) into the sliding skid (1) and screw it in place.
10.2
Setting the lateral links
KMG000-024
For mowing set the height of the three-point hitch until the side links (3) in the front area (1) and
in the rear area (2) are at the same height. The setting is made by raising the machine.
Raise the machine until the lateral suspension arms (3) are set to
X = approx. 0 mm
.
10.3
Setting Overcut
1
I
II
III
2
KM000-165
