Operation
35
Pos: 66.1 /Überschriften/Überschriften 1/A-E/Bedienung @ 0\mod_1199789505403_78.docx @ 34825 @ 1 @ 1
10 Operation
Pos: 66.2 /Überschriften/Überschriften 2/U-Z/Vor dem Mäheinsatz @ 3\mod_1204788384465_78.docx @ 73168 @ 2 @ 1
10.1
Before mowing
Pos: 66.3 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Arbeitseinsatz / Mähen @ 73\mod_1307695972255_78.docx @ 654926 @ @ 1
DANGER! - Using the machine for work
Effect: Danger to life, injuries or damage to the machine.
•
The glide skids must rest on the ground before start-up and during work
•
Maintain an adequate safety distance from the cutting tools during operation
•
There is danger of foreign objects being forcibly ejected even when the machine is
operated properly. Persons must therefore be directed out of the danger zone of the
machine.
•
Special care should be taken when working near roads and buildings)
Pos: 66.4 /BA/Bedienung /EasyCut/Mähen/Mähen EC B 1000 / B 870 @ 100\mod_1330355620077_78.docx @ 892830 @ 2 @ 1
10.2 Mowing
•
Swivel parking supports into transport position.
•
Move the machine to the working position.
•
Block the rear power lift.
•
Fold down the safety device.
•
Set the lateral guides correctly.
•
Before switching on the PTO make sure that the selected RPM and the direction of rotation
of the tractor PTO agrees with the direction of rotation of the machine and its permitted
maximum RPM.
•
Before driving into the crop engage the tractor PTO in neutral gear and slowly bring it up to
the nominal machine RPM.
•
Drive into the crop.
•
Check the mowing unit suspension during mowing.
•
To ensure a clean cut, adjust the driving and cutting speeds to the prevailing conditions (soil
condition, state of the crop, height, density).
Pos: 66.5 /BA/Bedienung /EasyCut/Hinweis Beim Mähen Steuerventil schwimmstellung/senken @ 9\mod_1220881412391_78.docx @ 128661 @ @ 1
Note! - While mowing
Effect: Proper use of the machine
•
Leave control unit(s) in the "Lower" or "Float position" position for work.
Pos: 66.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Summary of Contents for EasyCut R 360
Page 85: ......
