Operation
40
Pos: 66.38 /Überschriften/Überschriften 2/A-E/Abbau der Maschine @ 3\mod_1204792387824_78.docx @ 73245 @ 2 @ 1
10.5
Detaching the machine
Pos: 66.39 /BA/Sicherheit/EasyCut/Gefahr - Maschine abstellen_mit Hydraulikschlauch @ 9\mod_1220883208423_78.docx @ 128830 @ @ 1
Danger! - Unexpected movements of the machine
Effect: Danger to life, serious injuries
•
No one is permitted inside the danger zone.
•
Park the machine on a solid and even surface.
•
You should not unhitch the machine until the engine has been switched off and the ignition
key has been removed.
•
Secure the tractor against rolling.
•
Use extreme caution when attaching implements to or detaching them from the tractor! The
accident prevention regulations must be complied with absolutely.
•
When connecting the hydraulic hose to and disconnecting it from the hydraulic system of
the tractor, the tractor system as well as the machine system must be depressurised! Move
the appropriate control valves into the flow position.
•
When detaching the machine, do not walk between the tractor and the machine!
Pos: 66.40 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / Einstellungen/Gefahr - Einstellung an den Entlastungsfedern nur in Transportstellung Mähwerke @ 9\mod_1220883469610_78.docx @ 128852 @ @ 1
Danger! - Setting on the compensation springs
Effect: Danger to life or serious injuries
•
The compensation springs should be adjusted only while the machine is in the transport
position. In the working position the compensation springs are subject to high tensile stress.
•
Severe injury can be caused if the compensation springs are removed while in the working
position.
•
The lower threaded blocks on the compensation springs must be fully screwed in.
Pos: 66.41 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Summary of Contents for EasyCut R 360
Page 85: ......
