III - 4
3.4.2 Jack Stand
Front jack stand
The rotary tedder is fitted with a jack stand (1) which
can be swung clear to the rear. Prior to operation the
jack stand must be swung to the rear as follows:
Jack Stand at the rear
The rotary tedders KW 460, KW 550, KW 670 and KW
770 are fitted with a jack stand (2) at the rear. In working
position, fold up the jack stand and secure it in
position "3"
with a linch pin (1).
The rear jack stand (2) mainly prevents
the rotary tedder from tipping over
backwards when it is stopped while in
operating position. - Danger of
accident!
KW000001
1
2
I
•
Pull pin (2) out of
position I.
•
Swing jack stand (1) to the rear.
•
Install pin (2) in
Position I
again.
KW-0-053
2
1
3
3.5 Transport locking device
The rotary tedder is equipped with a mechanical locking
device.
Fix the control cable (2) to the tractor. Make sure that
the cable does not come into contact with the tractor
wheels.
Make sure that the transport locking
device is always correctly engaged
when the machine is in transport
position.
KW000009
1
2
Summary of Contents for KW 5.50 / 4 x 7 T
