Bedienungsanleitung KA-1
11
4.
Installation and Function
Depending on what blade and plunger, the pineapple peeler processes pineap-
ples. These can be top removed with the blades and plungers, peeled, cut in
slices or in corners.
Included in delivery
Delivery includes the fully assembled pineapple peeler made of stainless steel,
one blade and one plunger with the size of 89 mm. Also in the box are all the
documents including the instruction manual and the optional other blades, plung-
ers and accessories.
Parts and Description
Body (1):
built of stainless steel; He has a support surface where the
blades are placed.
Pushing Handle (2):
The pushing handle press the plunge to the pine-
apple. It's routed on four pole on the body.
Plunger (3):
The plunger pushes the pineapple through the blade. He
is attached to the pushing handle.
Blade (4):
The blade is placed on the support surface on the body.
Spring Plate (5):
The spring plate ensures that the pushing handle re-
mains in its upper end position.
Mounting Pin (6):
The mounting pin fastened the plunger on the push-
ing handle. For taking the plunger, the mounting pin have to be re-
moved.
Frame (7) :
Forms the stable basis on which the pineapple peeler is
mounted.
Splash Protection:
The splash protection is attached to the back of the
body. It prevents the underlying area (e.g. walls) while processing the
pineapples for being splashed.
GN-Tray :
The tray is placed below the blade support surface. The cut
is falling directly inside the tray after finishing the process.
