Instruction Manual KG-353
21
4
9
2
15
3
Installing and Removing the Slicing Disks
To install the slicing disks
(9)
you have to
move the pushing handle
(4)
to the left. You
also have to open the lid. Install the slicing
disk on the axle. Move the disk counter clock-
wise until the disk moves downward. After that
install the remover
(15)
by moving counter
clockwise until the remover is attached to the
slicing disk.
Advice: you should not be able to lift the slic-
ing disk after your installation
To remove the slicing disk open the lid
(8),
turn the remover
(15)
with the in-
tended tool
(16)
in
clockwise and turn the disk
(9)
clockwise till the end. Now
remove the disk from the axle.