Instruction Manual KG-353
22
Working with the Big Chute
The intended use of the big chute is to
slice bigger chunks e.g. ½ cabbage or a
big amount of smaller pieces like mush-
rooms.
Before you start, make sure that the col-
lecting container
(6)
(and the ejector
(7)
are installed. Install the slicing disk and
close the lid.
Advice: before operating the slicer, make
sure that the collecting container, axle,
slicing disks, ejector as well as the chute
and the cube grate are clean.
Now, you can place the food in the chute but make sure that nothing comes out
of the chute because you won’t be able to move the pushing handle
(4)
over the
chute. Turn on the machine by pushing the green button
(10)
. Move the pushing
handle
(4)
to the right and move the pushing handle with little force downward.
Do not use too much force when pushing the food with
the pushing handle. The vegetable slicer won’t work fast-
er. You just squeeze the food.