Instruction Manual KG-353
23
5
Working with the Small Chute
The small chute is located at the pushing handle
(4).
Its purpose is to slice long and thin material (e.g.
cucumbers or carrots).
Before operating make sure that the collecting con-
tainer
(6)
and the ejector
(7)
are installed. Install the
slicing disk and close the lid. Move the pushing han-
dle
(4)
to the right and slide it to its lowest position.
Remove the pusher
(5)
out of the small slicing com-
partment and fill the small compartment with materi-
al. Start the engine by pushing the green button
(10)
and use the pusher
(5)
to push the food with moder-
ate force.
Advice: insert the long material always with the peak
first.
Never use anything else but the pusher (5) for pushing
down the material.