Instruction Manual KG-353
26
Error Correction
Error
Possible cause
Solution
Machine does not start.
The
green button doesn’t
glow.
Machine is not plugged
in
Lid is not closed proper-
ly
Damaged fuse
Safety switch at the lid
is defect
Control board is defect
Plug in the machine
Close the lid
Those malfunctions
are to be fixed by
trained personal and
customer service
only.
Machine doesn’t start but
green light is glowing.
Pushing handle safety
switch is defect
Overheating protection
is active
Engine is defect
Control board is defect
Those malfunctions
are to be fixed by
customer service
only.
The cut is not satisfying.
Check the slicing disk
and knives.
Those malfunctions
are to be fixed by
customer service
only.
Machine stops during
operation.
Chute to full
Operating capacitor is
defect
Try again with less
material
Those malfunctions
are to be fixed by
customer service
only.
The processed food is
not coming out of the
ejector.
The ejector is missing
Assemble the ejector