Instruction Manual KG-453
28
Installing the feed hopper
To work with the feed hopper
(23)
, remove the pushing handle
(5)
and the lid
(3).
For insertion, push the hinge joint
from the feed hopper to the
hinges on the machine body
(2)
.
Now you can close the feed hop-
per
(17)
and insert the safety grid
(21)
in the opening of the pushing
device
(5)
. Use the agitator
(22)
instead of the remover
(15)
. To
open the lid you have to unlock
and rotate the safety grid
(21)
to
the side first.
Working with the feed hopper
This is used to processed bulk and
round foods (e.g. nuts, potatoes and
apples).
Before you start, make sure that the
collecting container
(7)
and the
ejector
(8)
are installed. Install the
slicing disk, mount the agitator
(22)
,
close, and lock the lid
(20)
.
Then lock the safety grid
(21)
with
the clamp
(22)
located on the feed
hopper
(23)
.
Turn on the vegetable slicer, and select the desired speed. You can then pour
the food onto the slide. These slide into the slot and are cut.
21
22
23
21
23
