Instruction Manual KG-453
34
Checking the Safety Devices
The flawless function of the safety devices needs to be checked once a week by
the user. The engine has to stop in
following cases after a maximum of 2
seconds:
−
When opening the lid, or cu-
cumbers paper, the engine
should not start if the lid is
not properly closed and
mounted cover,
−
When moving the pushing
handle, distance X 45 mm
of the edge of the chute.
In case one of those two safety devices are defect:
−
You cannot operate the vegetable slicer.
−
Has to get repaired by your customer service.
Advice for vital function devices
The replacement of vital function devices is only be made by your customer ser-
vice.
These include:
−
circuit board art.no: 45410
−
switch to lock the lid art.no: 100831
−
switch to lock the front cover art.no: 100831
−
switch to lock the pushing handle art.no: 100554
−
pusher small Ø37 art.no: 100761
−
pusher medium Ø58 art.no: 100762
−
pusher big Ø65 art.no: 100760
The pusher must always be stored together with the vegetable slicer. In case of
loss it has to be replaced by an original spare part.
