background image

ROBOT TROLLEY (EN) 
Model 4500 and 2500RS

Congratulations on the purchase of your new Robot Trolley, and thank you for choosing a product from 

Kronings Aps

It is important that you read this manual thoroughly before using your Robot Trolley. Unauthorized use or maintenance 

may result in voidance of the guarantee. 

WARNING NOTICE FOR BATTERY 

Charge the battery completely before first use! 

The Lithium battery installed in this machine has only been charged to part of its capacity (as freight 
regulations prescribe). It is vital that you charge the battery to its full capacity before operating the 
machine to ensure high performance and long life. Charging for the first time may take 6-8 hours (see 
recharging instructions). 

Always recharge fully after use until the LED light turns green! 

Recharge Periodically! 

If the Robot Trolley goes unused for more than two months, it is highly recommended to inspect and 
charge the battery until the LED on the charger changes from red to green, in order to maintain maximum 
battery life and performance. 

Do not store the Robot Trolley in direct sunlight or at high temperatures. High temperatures may drain the 
battery quickly. 

Failure to follow these instructions will damage 

the battery and void the battery’s warranty

Batteries: Charging and changing 

Battery for Robot Trolley 

1. To charge the Robot Trolley battery, connect the charger to the Robot Trolley by placing the charging

plug in the outlet on the back end cover.

2. The battery charger displays a constant red light while charging is in progress. Completion of battery

charging is indicated by a constant green light.

Battery Charger 

Charging 

Battery Charger 

Fully Charged 

Charging 
Outlet 

1

Summary of Contents for 2500RS










Reviews: