20
DIRECT CONNECT (CONT.)
If your TDD has the optional ASCII feature, your TDD will give you the option to answer calls
in ASCII.
Your TDD now automatically
answer ASCII and Baudot calls.
Your TDD will only automatically
answer Baudot calls.
Your incoming TDD calls will be answered, printed (if used with an external printer - NOT
SUPPLIED) and stored in memory bank 5.
NOTE: The Auto-Answer feature will work with or without an external printer (NOT SUPPLIED).
• If used with an external printer, all calls will be printed as well as saved in memory bank 5.
• If used without an external printer, all calls will be saved in memory bank 5.
To review message, see Viewing a Stored message (page 12)
To answer an Incoming Call when the Auto-Answer is ON:
1. Press the [SPACE BAR] once before or after Auto-Answer message is sent.
• The Auto-Answer is removed.
• The PortaView Plus is now ‘on-line” with caller.
PRESS:
Alerts your caller that you are on
the line.
Type your greeting on the keyboard.
Your TDD is again in Auto-Answer
and ready to answer calls.
NOTE: Your PortaView Plus will automatically disconnect and return to Auto-Answer after 60 seconds if neither person is
typing. If you need to prevent this from
You will now not be disconnected.
IMPORTANT:
To end your call and return to Auto-Answer:
You have now disconnected the
phone line and you are back in
Auto Answer.
To turn Auto-Answer OFF:
19
ANSWER ASCII Y/N
OR
Y
AUTO ANSWER ON
N
AUTO ANSWER ON
X
X
+
+
X
XXX
HELLO GA
XXX HELLO GA
CTRL
+
9
AUTO ANSWER ON
CTRL
+
0
NO TIMEOUT
CTRL
+
9
AUTO ANSWER ON
CTRL
+
0
AUTO ANSWER OFF
Summary of Contents for PORTAVIEW 20 PLUS
Page 34: ...NOTE 32...
