- 28 -
3.
2.
1.
Close the clamp by moving the clamp lever to
the left (
1.
) Close the safety guard (
2.
) Lower
the blade by pressing both cutting buttons (
3.
)
If the last sheet of paper is not completely cut,
gradually turn the knob for blade-depth
adjustment (
A
) ¼ turn to the right until the
paper is cut along the entire length.
(1 turn = 1,5 mm)
Open the clamp by moving the clamp lever to
the right (
1.
).
Remove all tools and distribute
paper along the entire cutting length (
2.
).
Turn main switch to position "I" (
3.
).
Blade and cutting stick replacement
