- 19 -
C
K
W
L
A
B
In memory 3 + 4 (mm and inch) no
measurements are saved. Until a first input
of data the following will be shown in the
corresponding fields:
.
The measurements entered remain stored.
They cannot be deleted but overwritten.
How to program Memory 3 and 4
Press the memory button
W
to enter the
memory platform (3 or 4). Enter the required
measurements or overwrite them.Press the
button and keep it pressed until
an acoustic signal sounds, the
measurements have been saved now.
Warning!
Before storing or cutting a measurement
please check if the correct measurement
scale (cm or inch) see above is stored.
For information on how to store see picture
below left. Is shown on the screen see
K
.
After 30 minutes the machine (
A
B
) switches
to energy-saving mode.
The machine is reactivated by touching the
keypad area
L
.
Operation
