- 33 -
2.
A
1.
A
A
4.
5.
1.
3.
2.
2.
1.
3.
Close the safety guard (
1.
) Lower the blade by
pressing both cutting buttons (
2.
). Keep one
button pressed and turn off the main switch
(
3.
).
Open the safety guard (
4.
). With the special
wrench (
B)
the 3 eccentrics should be screwed
down (
5.
)until the paper is cut along the
entire length of the blade (The blade must
remain parallel, not too deep into cutting stick).
Turn main switch to position "I" (
1.
). Blade will
return to upper position. Tighten the blade
screws (
2.
) firmly.
2.
3.
1.
Blade and cutting stick replacement
