- 10 -
B
A
C
D E
STOP
The machine may only be operated, if
the operating instructions and the safety
instructions have been understood.
Before each use, check the safety
equipment for completeness and
functionality.
• All covers have to be mounted (
A
).
• Safety beam guard must be mounted (
B
).
• The release for cutting is allowed only if
the two-hand safety device is operated at
the same time (
C)
•
Safety light beam:
If the test rod (E, tool kit) is held into
the
protective field (D), an activated work
cycle must be stopped immediately.
We recommend you keep a record of your
test results.
Startup
