Owner’s manual
10
EN
connected device automatically. Please note, your device must
be on with Bluetooth function turned on.
•
If the transmitter has connected with an unwanted receiver,
turn off that receiver, disconnect the transmitter from power
supply and press Reset button, then connect the transmitter
to power supply again, turn on the desired device and carry on
pairing process according to the above instructions.
•
If the pairing process was not successful, disconnect the
transmitter from power supply, then connect it again and carry
on pairing process according to the above instructions.
Resetting the transmitter
1. Use a screwdriver, a toothpick or another similar object and
insert it into line input of the transmitter until you feel that the
button is pressed and you hear a characteristic click.
2. The device is successfully reset.
SPECIfICATIoN
•
Bluetooth version: 4.2
•
Bluetooth range: up to 10 m
• Bluetooth profiles: HSP, HFP, A2DP, AVRCP
•
Codecs: SBC
•
Sampling rates:
•
USB mode: 44 kHz
•
Analogue mode: 32 kHz
•
I/0:
•
Line input (3,5 mm)
•
USB port
•
Power supply: 5 V; 0,5 A
•
In set: Jack-RCA cable (jack 3,5 mm plug – 2x RCA plug)
