Owner’s manual
Owner’s manual
26
27
EN
EN
Adjusting the display brightness
Press the DIM button to select brightness level.
Play from Bluetooth device
To connect your Bluetooth device to the unit, you need to
pair the device to the unit.
1. To connect the devices, go to the Bluetooth mode by
pressing the SOURCE button, or Bluetooth button on
the remote.
2. Turn on the Bluetooth function on your device.
3. Search for other Bluetooth device with your device.
4. Select "KM1995" from the list.
5. Enter default password “0000” if necessary.
6. To clear pairings, press and hold the Bluetooth button
on the remote.
Caution:
• The operational range between this unit and a Bluetooth
device is approximately 10 m.
• Compatibility with
all Bluetooth
devices
is
not
guaranteed.
• Any obstacle between this unit and a Bluetooth device
can reduce the operational range.
• Keep this unit away from any other electronic device that
may cause interference.
• If the distance between the devices exceeds the
communication range, the devices will be disconnected.
To reconnect the devices, place them within range.
Playing from an external device
1. To play tracks from an external device, connect the
device to the main unit with an audio cable to the AUX
IN or AUDIO IN socket.
2. Press corresponding AUDIO IN/AUX IN button to select
the audio input.
3. Start playing on the external device.
OPERATION
Turn on/off
To turn on device, press the power button. The device will
return to the last selected source. To turn off the device,
pres the power button again.
Attention: after 15 minutes of being idle, the device will
automatically go to the power saving mode (apart from FM /
DAB+ radio and Bluetooth mode with connected external
device).
ECO mode
To turn the ECO mode on or off, press and hold the power
button (while the device is in standby mode) for 2
seconds. In ECO mode, the clock will not be displayed,
and the standby mode will be indicated with the red LED
on the power button.
Set sleep timer
The device is equipped with the turn off timer. After this
is enabled, the device will go to the standby mode after
set time.
1. When the device is turned on, press the timer button.
The display will show a message about activating the
timer function.
2. Keep pressing the timer button, until you get the
desired time. After a moment, the countdown will start
and there will be Zz icon on the display.
3. To turn off the timer, keep pressing the timer button
until you get the "SLEEP OFF" message on the display.
Setting the clock
1. While in standby mode, press and hold the CLOCK
button to start setting the clock.
2. Use the track change buttons to select the desired
value.
3. Press CLOCK button on the remote to go to next option.
Summary of Contents for KM1995
Page 57: ...112 113 ...
Page 58: ...is a registered trademark ...
