Kruger KFL50BBC, Manual

2. GENERAL INFORMATION

2.1 

SCOPE OF THE MANUAL

To make it easier to read about and look up various

subjects, refer to the table of contents at the be-

ginning of the section in your language.

This manual has been prepared by the manufactu-

rer and is an integral part of the product. As such,

it must be kept in a safe place for the machine’s

entire service life until demolition.

The customer must ensure that machine operators

have read or are familiar with the contents of this

manual so that they strictly follow the instructions

described herein.

Constant compliance with the instructions provi-

ded in this manual is the only way to guarantee

the best results in terms of safety, performance,

efficiency and service life of the product you now

own. Non-compliance with these rules may cause

injuries to people and damage to the machine, the

scrubbed surface and the environment: in no case

can such injuries or damage be attributed to the

manufacturer.

This manual refers in detail to the machine and

provides instructions and descriptions only about

our batteries and battery chargers (optional).

The batteries and the battery charger are basic

complementary machine parts and will affect its

operation in terms of running time and perfor-

mances. Only the correct combination of the two

accessories (batteries and battery charger) will en-

sure the highest possible performances and avoid

wasting lots of money. For more detailed informa-

tion refer to the special battery and battery charger

manuals.

Our recommended battery chargers and batteries

(optional) ensure the best combination with the

machine and offer outstanding versatility (battery

charger) as well as the category’s highest quality

and performance standards.

2.2 

TERMINOLOGY AND SYMBOL LE-

GEND

For the sake of clarity and to efficiently highlight 

the various aspects of the instructions provided, 

terms and symbols were used that are defined and 

illustrated here below:

- Machine. This definition replaces the commercial

name to which this manual refers.

- Operator. An operator is considered the person

who normally uses the machine and is familiar with

its operating features but does not have the speci-

fic technical skills to work on that machine.

- Technician. A technician is considered a person

who has the experience, technical education, legi-

slative and regulatory knowledge that allows him

to carry out any type of required work, and the

ability to recognize and to avoid possible risks du-

ring machine installation, operation, handling and

maintenance.

- INDICATION SYMBOL

 (

☞

). Particularly impor-

tant information to avoid machine malfunctions.

- ATTENTION SYMBOL

 (

•

). Very important in-

formation to avoid serious damage to the machine

and to the environment in which it operates.

- DANGER SYMBOL

 (

•

). Vital information to

avoid serious (or extreme) consequences affecting

the health of persons and causing damage to the

product and the environment in which it operates.

2.3 

PRODUCT IDENTIFICATION

The nameplate located under the dashboard con-

tains the following information:

• Manufacturer ID

• CE mark

• Model code

• Model

• Overall power rating

• Serial number

• Year built

• Weight with maximum load

2.4 

SPECIFIC USE

This machine is a floor scrubber-drier: it must be 

used to scrub and to vacuum liquids of flat, rigid, 

horizontal, smooth or moderately rough and uni-

form floors that are free from obstacles in both 

civic and industrial environments. Any other use 

is prohibited.

Please refer very carefully to the safety information 

reported in this manual.

The scrubber-drier distributes a quantity of a water 

and detergent solution (adjustable) on the surface 

to be cleaned, while the brushes remove any dirt 

on the ground. The machine’s suction system, 

using a ground squeegee, perfectly dries the liquids 

and the dirt just removed from the front brushes 

in a single pass.

By efficiently combining a cleaning detergent with 

various types of brushes (or abrasive disks), the 

machine can adapt to all the various combinations 

of floors and dirt.

2.5 

TECHNICAL MODIFICATIONS

This machine was designed and built in accordance 

with the fundamental requirements for user safety 

and health as set forth in European directives. For 

this reason the CE mark was placed on the ID label. 

The European directives to which the equipment 

conforms are referenced in the Certificate of con-

formity annexed to this manual. This certificate will 

no longer be valid if the equipment is modified in 

any way without the manufacturer’s prior autho-

rization.

The manufacturer reserves the right to make tech-

nical modifications to the product, without prior 

notice, in order to make the necessary technical 

upgrades or improvements. For this reason, some 

details of your machine may be different from the 

information in the sales catalogues or from the il-

www.kruger.es

Página 26 de 42

Manual KFL50E-KFL50BBC-KFL50BBCTR