8
Description
. Components of the hand-mixer
a
Control button
a1
Start / Stop control and 2 or
S +3 speeds (depending on model)
a2
Ejection
a3
Turbo function (depending on model)
b
Cord winder with holding clip
DEPENDING ON MODEL AND/OR
OPTIONAL
. Accessories on front outlet
c
Nut-shaped plastic whisks
d
Nut-shaped stainless steel whisks
e
Small turn dough hooks
f
Large turn dough hooks
g
Cooking whisk
h
Slicer - grater
h1
Drums
i
Puréeing attachment
j
Mini-chopper
. Containers
k
Sieve
l
2.75 l bowl
m
2.5 l bowl
n
1 l cup
Safety recommendations
• Before using your hand-mixer, please read
the instructions carefully: any use which
does not conform to the instructions for use
will absolve Krups from all liability.
• Your hand-mixer is intended solely for
domestic use, only for the functions
indicated and within the house.
• Never leave the hand-mixer within the reach
of children without supervision. Use of this
hand-mixer by young children or
handicapped persons must be carried out
under supervision.
• Do not allow the power cable to hang down
within the reach of children.
• Check that the voltage of your hand-mixer
corresponds to that of your electrical system.
Any connection error will invalidate the
guarantee.
Wiring instructions for U.K and Ireland only :
APPLIANCES WITH FITTED PLUG
Important: For your convenience this
appliance is supplied complete with a plug
incorporating a 3 amp fuse.
In the event of replacing a fuse in the plug
supplied, a 3 amp fuse approved by ASTA to
BS1362 must be used.
If the socket outlets are not of the 13A BS
1363 type, and therefore do not accept the
plug connected to this appliance, cut off the
plug.
When cut off, this plug is a shock hazard if
inserted into a socket outlet and must
therefore be disposed of safely.
If the fuse cover is detachable, never use the
plug with the cover omitted. Replacement
covers can be obtained from your service
agent.
Fit the appropriate plug according to the
instructions in paragraph “Fitting a plug”.
With alternative plugs a 5 amp fuse must be
fitted either in the plug or adapter or at the
main fuse box.
APPLIANCES WITHOUT FITTED PLUG
FITTING A PLUG - IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
BLUE
: NEUTRAL
BROWN
: LIVE
But the colours may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter ‘N’ or coloured black. The wire
which is coloured BROWN must be connected
to the terminal which is marked with the
letter ‘L’ or coloured red.
English
GNA2/GNA4/GNA6/GNA9.PM65
19/01/04, 15:13
8
