5. Move the temperature control knob to the required temperature. See ‘Settings’
section to determine the right temperature
6. Determine the required preparation time for the ingredients (
see ‘Settings’ section
).
7. To switch on the appliance, turn the timer knob to the required preparation time.
Add 3 minutes to the preparation time when the appliance is cold.
Note: If you want, you can also let the appliance preheat without any ingredients
inside. In that case, turn the timer knob to more than 3 minutes and wait until the
indicator light goes out (after approx. 3 minutes). Then fill the basket and turn
the timer knob to the required preparation time.
The indicator light will illuminate.
The timer starts counting down the set preparation time.
During the hot air frying process, the indicator light will illuminate and turn off when
the appliance reaches the desired temperature. This indicates that the heating element
is switched on and off to maintain the set temperature.
Excess oil from the ingredients is collected in the bottom of the pan.
8. Some ingredients require shaking halfway through the preparation time (see ‘Settings’
section). To shake the ingredients, pull the pan out of the appliance by the handle and
shake it. Then slide the pan back into the air fryer.
Caution: Do not press the basket release button during shaking.
Tip: To reduce the weight, you can remove the basket from the pan and shake the
basket only. To do so, pull the pan out of the appliance, place it on a heat-resistant
surface and press the basket release button.
Tip: If you set the timer to half the preparation time, you will hear the timer beep when
you have to shake the ingredients. However, this means that you have to set the timer
again to the remaining preparation time after shaking.
9
.
When you hear the timer beep, the set preparation time has elapsed. Pull the pan
out of the appliance and place it on a heat-resistant surface.
Note: You can also switch off the appliance manually. To do this, turn the timer
control knob to 0.
10
.
Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pan back into the appliance and
set the timer for a few extra minutes.
11. Empty the basket into a bowl or onto a plate.
Tip: To remove large or fragile ingredients, use a pair of tongs to lift the ingredients
out of the basket.
12. To remove small ingredients
(e.g. fries)
, press the basket release button and lift the
basket out of the pan.
Do not turn the basket upside down with the pan still attached to it, as any excess oil
that has collected on the bottom of the pan will leak onto the ingredients.
After hot air frying, the pan and the ingredients are hot. Depending on the type of
ingredients in the Fry Delight steam may escape from the pan.
13. When a batch of ingredients is ready, the Fry Delight is instantly ready for preparing
another batch.
6
Summary of Contents for AJ1000
