19
English
TEChNICaL sPECIfICaTIoNs
Rated voltage
see plate on bottom of appliance
Rated power
see plate on bottom of appliance
Power supply
see plate on bottom of appliance
Insulation class
II
Cooling class
N
Casing material
Thermoplastic
size (w x h x d) (mm)
274 x 452 x 505 (490 without drip tray)
Weight
5.5 Kg (5.3 Kg without drip tray)
Cord length
1.1 m
Beer container
BeerTender Keg
Control panel
Top
operating conditions
With 80% R.h. min 12°C max 30°C
The manufacturer reserves the right to make constructive and engineering
changes as warranted by technological advances.
appliance complying with European Directive 89/336/EEC (Legislative
Decree 476 of 04/12/92) concerning electromagnetic compatibility.
safETy RULEs
NEvEr PLACE PoWErEd ComPoNENTS IN CoNTACT WITh
WATEr. ThErE IS A dANGEr ThAT ThIS mAy CAuSE
A ShorT CIrCuIT.
INTENDED UsE
n
This appliance has been manufactured exclusively for dispensing beer in a
domestic setting.
n
only original BeerTender Kegs mentioning “Compatible BeerTender” can
be used with the appliance; you should not use any other commercially
available beer containers.
n
Before using a keg, check the “best before end” date shown at the bottom
of the keg. Do not insert or use BeerTender Kegs after the date shown.
notice_krups_beertender.indd 19
10/08/10 14:29:53
