English
8
n
Rinse the pour spout between uses for optimal results. Handwash with
warm soapy water. Do not wash in dishwasher -
fig. 21
.
n
To remove, unscrew turning counterclockwise from main unit. To re-attach,
simply screw back in place turning clockwise.
n
You should never attempt to access internal parts of the appliance.
ImPOrTANT:
After cleaning, ensure all parts of your BeerTender
®
have
completely dried before closing the lid.
STORING THE BEERTENDER
®
n
When the BeerTender
®
is not being used for a long period of time, remove
the DraughtKeg
TM
and turn the control to “off”.
n
Remove the plug from the power outlet.
n
Store the BeerTender
®
at room temperature in a dry place out of children’s
reach.
n
Protect from dust and dirt.
TROUBLESHOOTING
Problem
Possible causes
remedies
The appliance does not
come on.
The appliance is not
connected to the outlet.
Connect the appliance
to the outlet.
You cannot position the
tap cover correctly.
You may have opened
the draught beer tube
(white plastic part at
the end of the serving
tube) by hand. If so, the
tap cover will not close
correctly and there is
a risk for the beer to
flow out.
Before installing the
draught beer tube
onto the BeerTender
®
tapping mechanism,
make sure that the
draught beer tube is
closed.
The DraughtKeg
TM
tap
or tube is not inserted
correctly.
If the draught beer
tube is not installed
properly in the tapping
mechanism or if the
tube is pinched, this
will affect the beer flow.
Please refer to Section:
Using the BeerTender
®
System to check that
you have properly set
up the BeerTender
®
.
notice_krups_beertender_nafta.indd 8
10/08/10 11:49:12
