English
9
No beer is being
dispensed.
The DraughtKeg
TM
is
empty.
Replace the
DraughtKeg
TM
with a
new one.
There is no
DraughtKeg
TM
inside
the BeerTender
®
appliance.
Install a DraughtKeg
TM
inside the BeerTender
®
appliance.
The BeerTender
®
appliance tap handle is
not correctly
installed/positioned.
Install/position the
tap cover correctly.
You cannot close the
lid.
The tap cover has
not been positioned
correctly.
Position the tap cover
correctly.
The DraughtKeg
TM
has not been correctly
installed.
Install the tap correctly.
Ensure the draught
tube has been installed
completely and is not
preventing the lid from
closing.
The BeerTender
®
appliance produces too
much foam when
dispensing beer.
The DraughtKeg
TM
has
not reached the right
dispensing
temperature.
Allow the DraughtKeg
TM
to cool to the right
temperature. You can
rely on the temperature
indicator on the
control panel of your
BeerTender
®
appliance.
The DraughtKeg
TM
has been shaken.
Wait 4 hours before
dispensing beer.
The tap handle is being
moved too slowly.
Firmly and quickly pull
the handle down and
forward as far as it
will go.
Beer flows out too
slowly.
The tap handle is not
open all the way.
Open the tap
completely.
notice_krups_beertender_nafta.indd 9
10/08/10 11:49:12