66
PROBLEMS
POSSIBLE CAUSES
SOLUTION
The lid does not close
There are foreign bodies
between the pot and the
heating plate
Remove the pot, check that
the heating plate, central
element and under the pot
are clean. Also check that
the central element can
move around
The lid open handle is not
correctly positioned
Check that the open handle
is completely open
The metal lid and/or the
tightening screw are not
properly installed or fully
screwed
Check that you have
positioned all of the
elements of the metal lid
and that the screw is tight
The product does not
decompress
The ball cover is not in
place
Let the product cool
completely and then
remove the metal lid and
position correctly the ball
cover (fixed in the lock
position)
The lid does not open once
the steam is released
The manometric rod is still
in the high position
After ensuring that no more
steam is released and that
the product is completely
cold, insert a pick into
the hole located between
the open handle and the
silencing valve. Be careful
of steam being released
once the stick is pushed
in. When no more steam
is released, try to open the
appliance
The appliance does not
become pressurised
Check that the seal, safety
valve and manometric rod
are clean
Clean your appliance by
following the instructions
provided in the instructions
Check that the lid is locked
and the marking is properly
aligned with the closed
padlock. Check that the
manometric rod can move
around and if it needs
cleaning
Check that the manometric
rod can move around and if
it needs cleaning
The decompression ball is
not positioned correctly or
dirty
Check that the ball is
correctly positioned and
that the cover is in the
locked position. Clean and
dry the ball and its support