English
n
If you prefer a 24 hour clock or military time you can switch from AM/PM
mode by pressing the H and min buttons simultaneously. The AM/PM
symbol will disappear when the clock is running in 24 hour mode.
n
You can press and hold the buttons to move quickly through the hours or
minutes.
PROGRAMMING THE UNIT
n
Use the
PROG
button to access 3 programmable functions. The LCD
will display a different function for each time the PROG is pressed. The
blinking display and the icon
alerts you that the unit is in a
programming mode. After pressing the
PROG
button the screen should
default back to the stand-by mode after 5 seconds of inactivity, accepting
the last programmed settings for auto-on and auto-off.
A u t o - O n s e t t i n g # 1 : f i g . 1 4 & 1 5
n
Press
PROG (r)
once, the AUTO program #1 is indicated with a red light
(o)
.
n
Press the H and Min buttons
(p)
to set a time for the machine to brew
automatically. You can press and hold the buttons to move quickly
through the hours or minutes.
n
The display will show digits with the current time.
Regular
Strong
n
Press
PROG (r)
when done.
A u t o - O n s e t t i n g # 2 :
n
Press
PROG (r)
twice, the AUTO program #2 is indicated with a red
light
(o)
.
n
This second preset start time can be used for days with later start times,
ie weekends.
n
After programming the automatic start time as described above, be sure
to prepare the machine for a brew cycle with water in the tank, coffee in
the brew filter holder, lid closed and jug securely in place.
n
Press the
AUTO-ON
button
(n)
to choose preset number 1 or number
2. You can check the preset times by pressing
PROG (r)
.
n
The machine will brew automatically at the designated time. The program
will need to be activated when needed again.
25
IFU_KR_COFFEE_MAKER_DAHLSTROM_NC00028136_Mise en page 1 13/12/11 11:48 Pa