English
24
A u t o - O f f f u n c t i o n :
n
The heating plate will keep the coffee pot at the right temperature for 30
minutes, after this the appliance will turn off automatically. The time that
elapses before the appliance turns off can be set at 30 minutes, 1 or 2
hours. See page 25 – Programming the appliance.
n
For best results brew only as much coffee as you will drink within 30-60
minutes.
P a u s e a n d S e r v e f e a t u r e :
n
If you wish to serve yourself a cup before the cycle ends, you can remove
the coffee pot and do so, even during the preparation cycle. Keep in mind
that this will change the taste you would normally get from a full pot in a
complete cycle.
Be sure to replace the jug quickly (less than 20 seconds) to avoid
overflow during the brew cycle.
For models with thermal pot :
to ensure maximum heat retention, rinse
the thermal pot with hot water before use, and close the lid by turning
clockwise.
WARNING :
Hot water continues to drip in the filter holder (h) when
the jug (f) is removed. The overflow of coffee and hot
water could cause burns.
Do not exceed the maximum capacity of the water tank as
shown by the water level indicator (g).
Place the ground coffee into the paper filter or directly
into a permanent filter.
Note : Pay attention to max level indicated on permanent filter.
After use, discard the grounds, and rinse the filter holder under
running water.
CURRENT TIME; SETTING THE CLOCK : FIG. 16
n
When the machine is first plugged in, the clock blinks and ask you for
setting the clock.
n
Press the H and Min buttons to set the time. This will ensure the Auto-
On function activates at the proper time of day.
!"""" "+5''02#)'#)'
Summary of Contents for Precision KM611T30
Page 189: ... www krups com 191 5 02 ...
Page 190: ... 5 02 ...
