The toaster is a Krups quality product. The heat-insulated casing makes for increased safety during use.
n
Use just the right length of flex and store the unnecessary part on the spool in the storage recess
underneath the appliance. Lead the flex out at the side of the appliance and plug in at the mains (
1
).
n
In order to remove any possible remains from the manufacturing operation, the toaster should, before
being used for the first lot of toast, be heated up 1 to 2 times to the highest toasting temperature,
without any bread in the toasting well (ventilate the room).
n
Insert the slices of bread (
2
).
Do not use slices which are too large or too thick, as they must not be allowed to stick in the toasting
well.
n
Selecting the degree of toasting (
3
).
n
Choose between 6 different degrees of browning by setting the selector to the appropriate position:
Position 1 = lightly toasted
Position 6 = very well toasted
n
When first using, try out the toasting setting, as the result depends upon the type of bread and the
degree of moisture.
Generally speaking, a higher temperature is required for breads other than white. Turn the toasting
grade selector to a lower number if, for example, only one slice of bread is being toasted.
Caution:
Relatively dry slices of bread, or bread that has already been toasted once, will brown much
more quickly and may under certain circumstances catch fire. Therefore set the heat control to
a lower setting and do not leave the toaster unattended.
TOASTING
n
Fully depress the lowering lever, which will then lock into position (
4
).
This then causes the appliance to switch on.
TAKING OUT THE TOAST
n
After completion of the toasting operation, the toast will automatically be raised and the appliance will
switch itself off (
5
).
n
Take out the slices of toast.
To break off the toasting operation before it is completed, simply press the lowering lever upwards or
turn the toasting regulator on “stop” position (
6
).
Note:
Should a slice of bread become trapped in the toasting well, pull out the mains plug, let the
appliance cool down and then carefully free the toast without touching the heating elements.
DESCRIPTION
a
Heat insulated casing
b
Crumb drawer
c
Flex storage spool
d
Lowering lever
e
Support for bread rolls
f
Toasting regulator
CONNECTING THE APPLIANCE
UPON FIRST USING THE TOASTER
USING THE TOASTER
English
7
KR_TOASTCONTROL_NC00119423_Mise en page 21/10/13 09:11 Page7
