English
8
Roll support
n
Raise the roll support by swivelling the two lifter grips upwards (
7
).
n
Place the rolls on the support and select the
position. Switch on the appliance (
8
).
n
Please take care for rolls rewarming function that the rolls and the lift have to be in the right position
(
9 - 10 - 11
).
To improve the results, turn the rolls over and repeat the toasting operation.
After use, lower the roll support by swivelling the two lifter grips downwards.
The roll support should not be used for longer than 10 minutes.
n
Before commencing the cleaning operation, pull out the mains plug.
Do not dip the appliance into water.
n
Never use an abrasive sponge to clean the toaster. Clean it with a moist cloth and then dry it with a
soft cloth to keep it bright.
n
Regularly remove crumbs and bits of toast.
n
Before pulling out the crumb drawer, allow the toaster to cool for at least ten minutes after
completion of the preceding toasting operation.
n
Pull out the crumb drawer and shake out the crumbs (
12
).
n
Clean with a moist cloth and then replace the crumb drawer.
Never
use the toaster without the crumb drawer in position.
The packaging comprises exclusively environmentally-friendly materials which should be
disposed of according to the local recycling arrangements.
Disposal methods for the appliance itself can be found by enquiry at the appropriate department
of the local authority.
Environnement protection first !
Your appliance contains a lot of recoverable or recyclable material.
When disposing of it, take it to a local civic waste collection point.
ADDITIONAL ACCESSORIES
CLEANING
DISPOSAL
KR_TOASTCONTROL_NC00119423_Mise en page 21/10/13 09:11 Page8
