10
– Select the desired thickness by turning the button
(F)
.
Setting slide thickness
V - CLEANING
VI - WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
– Refer to section III “Before first use”
– Check electrical connection and the start-up procedure.
– The appliance cannot operate without the platform
(G)
.
What if your appliance still fails to work?
– If you have any product problems or queries, please contact our Customer Relations Team first for expert help and
advice:
HELPLINE:
0845 602 1454 – UK
(01) 4751947 – Ireland
or consult our website - www.krups.co.uk
– Pull the safety button
(B)
and while holding it, press the On/Off button
(A)
with your left hand.
– As soon as the blade starts to turn, release the safety button
(B)
and
hold the On/Off button
(A)
down.
– Push the trolley
(D)
with your right hand to start slicing.
– As soon as the On/Off button
(A)
is released, the appliance will stop
automatically. The slicer will then only start again when you activate the
safety button
(B)
followed by the On/Off button
(A)
.
– This is a safety device that prevents involuntary start-up of the appliance,
especially by children.
– After use, turn the slice thickness setting button
(F)
to minimum.
A
B
Starting
VII - ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
Environment protection first !
Summary of Contents for SEMI PRO TR522341
Page 1: ......
