38
Step 1
Carefully unpack your
T.O by Lipton
machine and
remove the plastic film covering the front of the
machine.
Unwind the cable from the base of the machine to the
desired length and plug into a mains wall socket.
Step 2
Unpack and slide the cup stand under the machine.
Step 3
Remove the filter cartridge from the protective
packaging.
On the bottom side of the water filter cartridge you will
find a ring. Please leave the ring at the factory setting
(letter “C”). If not already the case, please turn the ring
to position ‘C’ as shown.
With the water tank removed from the machine, push
the filter firmly and vertically to the bottom of the
water tank, so it clicks into place noticeably. Make sure
that the filter is installed securely in the water tank. A
tight fit guarantees an optimal filtration performance
of the cartridge.
First prime your machine before making your first
cup of tea; this step is essential.
Prime again when you start your machine after a
long period without use, or if the water tank has
run dry.
Step 1
Place the water tank securely on the machine and fill with
potable water to the Maximum mark (MAX).
Taking care not to spill water.
Step 2
Place a large cup that can easily hold 250ml on the the
cup stand underneath the pouring spout.
SETTING UP YOUR
T.O by Lipton
MACHINE
PRIMING BEFORE FIRST USE
