43
RINSING THE SMART BREWING ORB
In the unlikely event of leaves still remaining in the Smart Brewing Orb, you can rinse it
separately to the brewing cycle, without a capsule.
Step 1
Switch on your machine.
Fill the water tank with drinking water to the
Maximum mark (MAX). Place a large cup that can
easily hold 250ml on the cup stand underneath the
pouring spout.
Step 2
Without a capsule
place the strainer into the holder
and slide into the machine.
Ensure the holder and strainer are fully
inserted.
Step 3
Press and hold simultaneously the small and large
cup buttons until the holder moves up and the
rinsing process starts (about 3 seconds).
Step 4
On completion of the rinse cycle the cup will be full
of hot rinse water and the holder will be lowered.
Dispose of the rinse water.
The machine is ready for use.
ATTENTION
• Do not consume the rinse water.
• Hot water runs through the appliance when operating.
